Software de Diseño Mecanico de Lineas
-
TABTEN 1:
Calculation program table laying single phase conductors or cables and beam guard lines AT and ATP. It takes into account the "creep" and determines the "offset" to the driver on casters. The approach for calculating lengths of the cables in the subsections for laying is 1 mm / km. The calculation of individual parameters for each span in uneven sections and for the cable sheaves are carried to the nearest 10 cm/1000m.
-
DISTEST:
Set of programs for designing transmission lines and EAT AT, defining the location and type of structures according to the planialtimetría. The distribution is done automatically for maximum economy, taking into account the physical characteristics (resistance to stress vertical and horizontal) family of structures available. Taking into account the geographic, junctions of other transmission lines and / or communications, railways, roads, etc..
Produce detailed tables with the efforts of each structure and sheet materials.
Module has a graph showing the distribution obtained on the screen, being able to make changes such as changing the location and type of towers, remove, or introduce new towers being able to print the result.
Additionally, forms can be obtained with the vain gravantes and wind for different climatic conditions, topography and verification of critical points resulting from the project (ground clearance and location of the towers).
Another module enables automatic with data supplied by the surveyor, the forbidden zones and minimum heights of conductors permitted by other lines or various obstacles.
-
CALCESTRUC:
Set of programs for the design and analysis of transmission line structures EAT and AT, porches and supports equipment structures.
Property types supported:
- Reticulated metal towers (including self-supporting and / or braced with the corresponding design of the reins)
- Tubular steel.
- Tubular concrete.
Produce detailed tables with the efforts of each structure and sheet materials.
Module has an on-screen graph showing the efforts in the structure and the deformations in it for verification. Allows printing.
Additionally it allows the design of foundations for transmission line structures EAT and AT, media portals equipment and structures.
Produce detailed tables and return of materials (for foundations forces).
-
DLTCAD:
Set of programs for the optimal distribution of structures, conductors and mechanical calculation of the design / analysis of the transmission structures Medium and High Voltage.
